Pulled the RH Front apron off today. I wanted to start on a bad panel to get used to the spot weld cutter and chisel. Worked pretty good. Next is to keep cutting the RH loose until I get the frame rail out. I attached some pictures of the front frame of the car. It has a bad spot at the bottom. I am going to blast it and hopefully have metal.I also finally got a good look at the cowl vents. They are rusted, so I have to pull the front cap off that section. I am not looking forward to that since ther are about 50 spot welds to get the cap off. The work is going to get worse before it gets better!!
No comments:
Post a Comment