I Need a Bigger Shop!!!

I think I may have to store some parts under my bed!! Here are some pics with the fenders, doors, and all the front end off. Nothing to surprising so far except I am a little puzzled on the drivers side firewall. There is rot thru the fire wall under the cowl vents, but looking up inside of the cowl vents, they don't look too bad. I am going to use a couple of cups of water to find out where the leak is. The driver's fender has also had some work in the past, because there is primer under the lower trim, but not body color.

Work summary from yesterday's progress.

Remove RH Fender-Done-5/2/2009
Fender Inside support will need replacement

Remove Outside Lower Edge Trim LH-Done-5/2/2009
Trim has a sheet metal screw thru it on the front from old repair.

Remove LH Fender-Done-5/2/2009
In Good Shape. Has been worked on before

Remove Wheel Spash Guard LH/RH-Done-5/2/2009
May Need new Rubber.

Remove RH Door-Done-5/2/2009
One Hing Plate has a stripped thread.

Remove LH Door-Done-5/2/2009

Check Passenger Torque Box-Done-5/2/2009
May need replacement. Has Rust Near Frame Tie In